The Hall Sensor is directly mounted in the (Automatic) Transmission Box to measure shaft rotation speeds for motor management purposes. The oil pressure load and high oil temperatures ..
This overmoulded coil must maintain a hermetic seal despite the thermal expansion of the internal copper wires at continuous use temperatures approaching 325°F (163°C).
Lower component costs by replacing metal in hot oil environment were achieved with Stanyl® on this injection-molded consolidated part, including extra integrated functionalities and a reduced part weight.
Passenger vehicles engines have to fulfill severe design criterias, low fuel consumption and exhaust emission levels being very popular ones. These performances are however threatened by the many ...
Stanyl®'s superior mechanical and thermal properties make it an outstanding material choice for solving the locking hub problems caused by the loads of increasingly powerful engines and the heat generated in anti-lock braking systems of sport utility vehicles
A FPC connector provides a signal (data) transfer from one board to another one and helps the miniaturization of consumer electronics, telecommunications, and networking equipment
