Properties of PA semi-aromatic - Polyamide semi-aromatic

Print  Recommend to a colleague
Cost Index*: 3
  Select unit system:
Strength and Limitations Applications Properties Processability
Property Value
   Dimensional Stability
Water Absorption 24 hours
   Electrical Performances
Dissipation Factor
   Fire Performances
Fire Resistance (LOI)
Flammability UL94
   Mechanical Properties
Elongation at Break
Elongation at Yield
Flexibility (Flexural Modulus)
Hardness Shore D
Stiffness (Flexural Modulus)
Strength at Break (Tensile)
Strength at Yield (Tensile)
Young Modulus
   Optical Properties
Transparency (% Visible Light Transmission)
   Physical Properties
Glass Transition Temperature
   Radiation Resistance
Gamma Radiation Resistance
UV Light Resistance
   Service Temperature
HDT @0.46 Mpa (67 psi)
HDT @1.8 Mpa (264 psi)
Max Continuous Service Temperature
   Chemical Resistance - Acetone
Acetone @ 100%, 20°C
   Chemical Resistance - Benzene
Benzene @ 100%, 20°C
   Chemical Resistance - Ethanol
Ethanol @ 96%, 20°C
   Chemical Resistance - Toluene
Toluene @ 20°C

*Cost Index
1.  Less than 1.6 €/kg or 0.9 $/lbs
2.  1.6 - 4 €/kg or 0.9 to 2.2 $/lbs
3.  3 to 11 €/kg or 1.6-6 $/lbs
4.  10 to 25 €/kg or 5.5 to 13.6 $/lbs
5.  More than 25 €/kg or 13.6$/lbs

  1. Select your polymer type

  Thermoplastics TPE/TPV, Thermoplastic Elastomers

  2. Select a Polymer

Disclaimer: all data and information obtained via the Polymer Selector including but not limited to material suitability, material properties, performances, characteristics and cost are given for information purpose only. Although the data and information contained in the Polymer Selector are believed to be accurate and correspond to the best of our knowledge, they are provided without implied warranty of any kind. Data and information contained in the Polymer Selector are intended for guidance in a polymer selection process and should not be considered as binding specifications. The determination of the suitability of this information for any particular use is solely the responsibility of the user. Before working with any material, users should contact material suppliers in order to receive specific, complete and detailed information about the material they are considering. Part of the data and information contained in the Polymer Selector are genericised based on commercial literature provided by polymer suppliers and other parts are coming from assessments of our experts.

Copyright SpecialChem SA
Plastics & Elastomers Bi-Monthly Innovation Review
Omnexus Daily Newsletter
About SpecialChem - About Omnexus - Commercial Acceleration Services - Advertise with us
Contact Us - Forgot Your UserID/Password? - Site Map - RSS - Terms and Conditions -
Copyright @ 2014 SpecialChem - Omnexus